Need help?Do you have a question about the Vanguard ZUMA and is the answer not in the manual?
Details unpacking major boat parts and lists necessary tools for rigging.
Illustrates and names various essential sailing knots for rigging and boat handling.
Explains rigging the vang system using blocks, shackles, and lines.
Details how to rig the traveler line and double traveler block for sail control.
Explains attaching and threading the mainsheet through blocks and to the boom.
Details attaching the rudder to the tiller with a bolt, washers, and securing the extension.
Details assembling the mast sections and stepping it into the boat.
Explains inserting battens, luffing the sail, and hoisting it with the halyard.
Details attaching the boom, rigging the vang, outhaul, and clew tiedown.
Explains tying the cunningham knot and threading the line for mast support.
Details securing the rudder and inserting the daggerboard before launching.
Provides instructions on how to unrig the boat components for storage or transport.
Offers tips on rinsing, drying, and storing the sail to prolong its life.
To Next Page
General