Need help?Do you have a question about the Vanguard Laser and is the answer not in the manual?
General| Weight | 59 kg (130 lb) |
|---|---|
| Crew | 1-2 |
| Hull Type | Monohull |
| Designer | Bruce Kirby |
| Year Designed | 1969 |
| Type | Dinghy |
| Length | 4.23 m (13 ft 10 in) |
| Sail Area | 7.06 m² (76 sq ft) |
Details contents of the standard delivery kit for Laser, Radial, and Laser 4.7.
Details contents of the Pro delivery kit for Laser, Radial, and Laser 4.7.
Illustrates and names essential knots like Figure 8, Square, Bowline, and Clove Hitch.
Defines key nautical terms such as Port, Starboard, Gunwale, Leeward, and Windward.
Guides installation of hardware like fairlead, clam cleat, and blocks for standard models.
Guides installation of hardware like forkhead blocks and cleat base for Pro models.
Step-by-step instructions for rigging the traveler line on standard Laser models.
Step-by-step instructions for rigging the traveler line on Pro Laser models.
Provides instructions for safely stepping the mast onto the boat.
Details the process of attaching the boom to the mast.
Guides for rigging the outhaul line for both standard and Pro Laser models.
Instructions for rigging the clew tie down line for both standard and Pro Laser models.
Step-by-step guide for rigging the vang on standard Laser models.
Step-by-step guide for rigging the vang on Pro Laser models.
Instructions for rigging the cunningham line on standard Laser models.
Instructions for rigging the cunningham line on Pro Laser models.
Instructions for attaching the daggerboard retainer shockcord.
Instructions for rigging the rudder on standard and Pro Laser models.
Steps for rigging the mainsheet and traveler block.
Guide on applying sail numbers according to regatta rules.
Essential tips for maintaining and extending the life of your sail.
Checklist of essential pre-launch checks for safety and boat readiness.
To Next Page