Vantec NEXSTAR SX User Manual

Owner’s Manual
Copyright © 2007 Vantec Thermal Technologies. All Rights Reserved.
All Registered Trademarks Belong To Their Respected Companies.
www.vantecusa.com

Vantec NEXSTAR SX Specifications

General

Material	Aluminum
Power Supply	USB Bus Powered
Drive Size	2.5-inch
Device Type	Enclosure
HDD Interface	SATA
Operating System Support	Windows, macOS
Supported Drive Types	SSD, HDD

Summary

Specifications and Features

System Requirements

Installation

Step 1: Remove Top Cover

Procedure to remove the top cover of the enclosure by pressing side buttons.

Step 2: Connect Hard Drive

Procedure for connecting the hard drive to the internal connector.

Step 3: Remove Bottom Cover

Guide to detaching the bottom cover of the enclosure.

Step 4: Secure Hard Drive

Instructions for securing the hard drive within the caddy using screws.

Step 5: Reassemble Enclosure

Final step for reassembling the enclosure after drive installation.

Connecting to Computer

Details on how to connect the installed Nexstar SX to a computer via USB.

Driver Installation

Disconnecting the Nexstar SX

Windows Disconnection

Procedure for safely disconnecting the Nexstar SX from Windows systems.

Mac OS Disconnection

Creating a New Partition

Troubleshooting and FAQ

Drive Letter Assignment Issues

Intermittent Recognition Errors

Data Corruption Causes