Need help?Do you have a question about the Vantec NexStar LX and is the answer not in the manual?
General| Interface | USB 3.0 |
|---|---|
| Material | Aluminum |
| Maximum Data Transfer Rate | Up to 5 Gbps |
| UASP Support | Yes |
| Hot-Swappable | Yes |
| Supported Drive Types | SATA HDD/SSD |
| HDD Interface | SATA |
| Operating System Support | Windows, macOS, Linux |
Connect to your network using an ethernet patch cable.
Connect to a computer directly using a USB cable.
Select desired cooling mode: Automatic, Manual Low, or Manual High.
Device automatically turns off when the computer is off.
Step-by-step guide for physically installing the hard drive into the enclosure.
Instructions for accessing the device via network or direct connection.
View system, network, and disk information for the NexStar LX.
Configure network IP settings, either automatically or manually.
Perform firmware updates, system reboots, and reset to factory defaults.
Manage shared folders for network access via SMB protocol.
Configure FTP access, including anonymous and user accounts.
Format, scan, and manage the hard drive connected to the enclosure.
Methods to access files on the NexStar LX from PC and Mac computers.
To Next Page
