Disconnecting the NexStar GX
18
6. Disconnecting the NexStar LX:
NexStar LX External 3.5” HDD NASEnclosure:
Windows 98SE/ME/XP/2000:
1) Make sure all operations using the hard drive within the NexStar LX has
ceased.
2) Close any windows and programs pertaining to the NexStar LX.
3) If connected by USB, double click the green “Unplug or Eject Hardware” icon
in the system tray and select [Safely Remove Hardware]. Select the device
you wish to remove and click on [Stop]. The system should prompt, “It is now
safe to remove the USB device.” If not, wait for any programs still using the
device to finish and try again.
4) Turn off the NexStar LX.
5) Unplug the USB cable from the system.
Mac OS:
1) Make sure all operations using the hard drive within the NexStar LX has
ceased.
2) Close any windows and programs pertaining to the NexStar GX.
3) From the Desktop, drag the NexStar LX hard drive to the trash.
4) Turn off the NexStar LX.
5) Unplug the USB cable from the system.
Warning: NEVER remove the NexStar LX while the hard drive is in use. Doing
so may corrupt the data on the hard drive or damage the hard drive, NexStar
LX, or computer.
To Next Page
Loading...
Need help?
General
