VT-TABLET-5081S User Manual
9
4. Device instructions
1), Power supply:
This device only supports 5V DC input. Please use the adapter provided with the DC-
Jack.
2), Typec usb supports both host and client modes.
3), Enter the download mode method:
1) Hold down the download key (the middle of the three keys) on the board.
2) Plug in the 5V adapter.
3) Plug in the USB cable.
Once the computer recognizes usb and go to download mode , you can release the
button and download software. (Please refer to the software user manual.)
Note：This device only for customer debugging and it does not support OTA
features .These features will be supported in our formal devices.
To Next Page
Loading...
