-16-
Choose the right time zone;
② Manually set the date / time, you can choose
to close the GPS automatic update, open the
manually set the date / time, and manually
correct the date and time.
Summer saving / winter will be automatically
switched over, turning off by default. After
opening, it will be automatically switched over
according to the date of daylight saving time and
winter time.
* This feature is only available in North America
and may cause time errors in other regions.
In addition, the date format and time zone settings
are also in this menu.
H. Screen saver setting: Screensaver setting is off
by default. Users can choose 30 seconds, 1
minute and 3 minutes.
I. Screen brightness: default automatic mode,
where the recorder is unmanned for 10
minutes, and the screen brightness is reduced
by 50%; or set to three different levels of
brightness: high / medium / low.
J. Volume: The default volume size is 2, the lowest
is 0, and the highest is 5.
K. Tip: According to different situations, the
recorder has set 5 kinds of tips, namely, the
switch sound, button tone, lock tone, formatted
alert and abnormal recording tone. All cue
tones are turned on by default.
I. Light source frequency: Different countries have
different light source frequencies. In order to
avoid affecting the recording, choose the light
source frequency of 50Hz or 60Hz according to
different regions.
To Next Page
Loading...
