Vantrue E360 - E360 Driving Mode Function

-24-
5.3 E360 driving mode function
In the driving process of E360 recorder, the driving
mode is the main mode. The following is the main
function introduction of the driving mode:
---Cycle video recording
The recorder in the boot will automatically enter the
loop video mode, video video will be saved with the
preset cycle time, saved in the ordinary video folder.
After this function is turned on, the video file
automatically overwrites the cycle, so as to avoid full
stop during driving.
5.2K +1440P 30 FPS
00:00:37
652024/10/3014:09:07
MP/H
The normal operation of the loop video function
depends very much on the speed of the memory
card, so please format the memory card regularly,
so as not to avoid the memory card files, card
aging and other problems affect the cycle video.
Please check the loop video regularly to avoid the
necessary video to be covered by the loop.
If the user turns off the loop video, the lock video
function will no longer work.
After closing the loop recording, each video will
take 20 minutes. After the recording card is full,
the recorder will stop recording and prompt "
card full!”
---Emergency video recording
In the process of driving, if encountered special
circumstances, the user can manually lock, or the
recorder automatically lock the video. Users can
press by pressing
pay
attent