---Parking monitoring
When parking, users can set up a variety of different
parking monitoring Settings according to the vehicle
itself, the parking environment, their own needs and
other factors. At present, four parking monitoring
modes can be set up.
Parking
monitoring
mode
Low bit rate
video
There are the following precautions for using the
parking mode:
To ensure that the recorder is in the parking mode,
use the VANTRUE or other stable and continuous
power to power the recorder.
ACC antihypertensive line should use VANTRUE ACC
antihypertensive line, and other brand ACC
antihypertensive line may not use ACC function
due to the different position of ACC detection PIN
feet.
In summer exposure conditions, we recommend
the collision detection mode. When the ambient
temperature in the car is as high as 60ā, it is
recommended for the user to turn off the
recorder to avoid abnormal operation of the
recorder caused by high temperature.
Both reduced video and parking mode (including
collision detection, mobile detection, low bit rate
video, low frame rate mode) can only be turned
on one, open one will automatically close the
other.
All the files of parking mode will be stored in the
parking video folder. In order to avoid being
overwritten by the cycle, please check regularly
to avoid loss.
The parking mode function will be continuously
improved with the function of the recorder. For
the specific software changes, please pay
attention to the announcement of the VANTRUE
To Next Page
Loading...
