- 28 -
ENEN
Note: If the dash cam continues to be hit during the collision detection
recording, it will exit the collision detection mode and enter normal
recording, restarting the 5-minute entry mechanism.
Motion Detection
When the motion detection is turned on, the icon will be displayed on
the recording interface, indicating that the dash cam is currently in
motion detection mode. Motion detection has three levels: low/medi-
um/high that can be adjusted, and the corresponding detection ranges
for motion detection is 6.6ft/13ft/19.7ft.
14:39:07 11-18-2022
00:00:37
MP/H
35
14:39:07 11-18-2022
00:00:37
MP/H
35
1440P+1440P 30FPS
1440P+1440P 30FPS
After entering motion detection mode, the icon will be displayed in
the middle of the screen. The dash cam enters standby mode and the
screen will turn off after 3 minutes with no motion detected.
To Next Page
Loading...
Need help?
General
