Step 1: Fix camera with 3M adhesive
Find a best location, tear off the 3M adhesive on the rear
camera, and fix the rear camera near by the car license
plate lamp. (If you need to adjust the angle, please attach
the rear camera bracket to the rear camera and tighten it
with screws first)
'SeiXh
Step 2: Remove the Panel
Remove your trunk's interior panel to expose the car's rear
wiring chambers. Pop open your trunk and look for a solid
interior panel covering the opposite side of your license
plate mounting area. Then, insert a trim removal tool or
other thin device behind the panel and pry it off
-26
To Next Page
Loading...
