Vantrue S1 - Basic Operation; Power ON;OFF

- 10 -
4. Basic Operation
4.1 Power ON/OFF
9. Start the car.
10. The camera will auto power on and start recording.
Once the car starts on, the camera will automatically turn on and
start recording.
When you do not want to use the dash cam, please long press
the power button to turn it off, and long press the power button
to turn it on again once you want use that.
There are two ways to turn OFF the camera:
a. Manually
Long press the power button to power it OFF.
b. Automatically
The camera will power off if the charger cable is disconnected or
if the vehicle is turned off.
NOTE:
When charging via computer with the included mini usb cable,
“Mass Storage” and “ Power On” will be displayed on the camera
screen, please select “Power On” to charge the dash cam.