16
Step21：
Hang the lighting rod (C13) onto the hook, either on the right or left side shelf, as
shown.
GAS CONNECTION
ONLY USE THE HOSE ASSEMBLY SPECIFIED BY MANUFACTURER ON THIS GRILL.
REPLACEMENT HOSE ASSEMBLIES MUST BE THOSE SPECIFIED BY THE
MANUFACTURER.
This is a limitative configured grill. Do not attempt to use other type gas supply unless the
grill has been reconfigured for other gas use.
The installation of this appliance must conform to local codes.
Make sure that both gas cylinder and gas hose do not come in contact with high temperature
part.
The absolute necessity of not obstructing the ventilation openings of the cylinder
compartment.
To Next Page
Loading...