Vaporesso BARR - Packing List; Use Instructions; Replace the POD; Fill E-liquid

2 English
USE INSTRUCTIONS
1. Replace the POD
- Pull out the used POD from the device;
2. Fill E-liquid
- Uncover the silicone plug at the side of the POD;
- Press down and squeeze the e-liquid through the hole;
- Please wait 5 minutes for the e-liquid to soak into the coil
completely.
PACKING LIST
1 x VAPORESSO BARR Device
2 x VAPORESSO BARR 1.2Ω POD (1.2ml)
1 x Type-C USB Cable
1 x User Manual
1 x Warranty Card
1 x Reminder Card