Need help?Do you have a question about the Vaporesso Target 80 and is the answer not in the manual?
General| Brand | Vaporesso |
|---|---|
| Model | Target 80 |
| Category | Vaporizers |
| Language | English |
Connect the tank to the battery via the 510 thread for a secure connection.
Remove the old coil and insert a new one, ensuring it aligns with the pod base.
Unscrew the top cap, fill through the slot, replace it, and wait 5 minutes for the coil.
Rotate the pod to align the air-inlet port for controlling airflow volume.
Turn the device on/off by pressing the power button 5 times within 2 seconds.
Adjust power and select modes like F(t), PULSE, SYSTEM SET, or DIY for personalized vaping.
Connect the Type-C cable to charge; monitor battery status on the screen.
Press the fire button 3 times to lock or unlock the device controls and screen.
Device shuts off if resistance is too low, displaying 'SHORT ATOMIZER'.
Device shuts off if no load or high resistance is detected, displaying 'CHECK ATOMIZER'.
Device shuts off if battery voltage is too low, displaying 'LOW BATTERY'.
Device shuts off if PCBA temperature is too high, displaying 'OVER HEAT'.
Device prevents overcharging and shuts off if power button is held too long.
Inverting the battery cell will not cause damage.
Lists specific user groups for whom the device is not suitable due to health or age.
Lists user groups for whom the device is not recommended, like non-smokers or pregnant women.
Details potential adverse reactions to nicotine e-liquid and advises seeking professional help.
To Next Page