Vaporesso XTRA - Product Specifications; Packing List; Operating Your VAPORESSO XTRA; Filling E-liquid and Power Operations

2 3English English
PACKING LIST
USE INSTRUCTIONS
1 x VAPORESSO XTRA Battery
1 x MESHED UNIPOD
(2ml, 0.8Ω, Pre-installed)
1 x UNIPOD (2ml, 1.2Ω, In Box)
1 x USB Cable
1 x User Manual
1 x Warranty Card
1 x Reminder Card
1. Fill the E-liquid
- Take out the POD from the battery,
uncover the silicone plug and gently
squeeze the e-liquid through the lling
hole. After the lling is completed, lock the
silicone plug back into place and make sure
it is tightly closed;
- If it is the rst time to ll the POD, please
wait for 5 minutes for the e-liquid to soak
into the coil totally;
- The POD is suggested to be replaced after
5 times relling.
2. Power on/off
Press the power button 5 times in 2s to turn it on or off. And the red, green and blue LED
lights will ash 1 time.
SPECIFICATION
Dimensions: 73.9 x 38.2 x 16.7mm
Display Single 3-color LED Indicator
Battery Built-in 900mAh
Resistance
UNIPOD - 1.2Ω
MESHED UNIPOD - 0.8Ω
Output Power
MESHED UNIPOD - 16W
UNIPOD - 11W
Charging Current DC 5V/1A
Filling Method Side Filling with Silicone Plug
POD Capacity 2ml