EasyManua.ls Logo

Vapormed MIGHTY MEDIC - Page 23

Vapormed MIGHTY MEDIC
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45 44
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic envi-
ronment – guidance
Where P is the
maximum output power
rating of the transmitter
in watts [W] according
to the transmitter
manufacturer and d
is the recommended
separation distance
in meters [m].
Field strengths from
fixed RF transmitters,
as determined by an
electromagnetic site
survey
1)
, should be
less than the com-
pliance level in each
frequency range
2)
.
Interference may occur
in the vicinity of
equipment marked with
the following symbol:
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects and people.
10. THE MIGHTY MEDIC VAPORIZER
1) Field strengths from fixed transmit-
ters, such as base stations for radio
(cellular/cordless) telephones and
land mobile radios, amateur radio,
AM and FM radio broadcast and TV
broadcast cannot be predicted theo-
retically with accuracy. To assess the
electromagnetic environment due
to fixed RF transmitters, an electro-
magnetic site survey should be con-
sidered. If the measured field strength
in the location in which the MIGHTY
MEDIC Vaporizer is used exceeds
the applicable RF compliance level
above, the MIGHTY MEDIC Vaporizer
should be observed to verify normal
operation. If abnormal performance is
observed, additional measures may
be necessary, such as re-orienting
or relocating the MIGHTY MEDIC Va-
porizer.
2) Over the frequency range 150 kHz
to 80 MHz, field strengths should be
less than 3 V/m.
Recommended Separation Distances between portable and mobile RF
Communications Equipment and the MIGHTY MEDIC Vaporizer
The MIGHTY MEDIC Vaporizer is intended for use in an electromagnetic en-
vironment in which radiated RF disturbances are controlled. The customer or
the user of the MIGHTY MEDIC Vaporizer can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mo-
bile RF communications equipment (transmitters) and the MIGHTY MEDIC
Vaporizer as recommended below, according to the maximum output power
of the communications equipment.
Rated maximum
output power of
transmitter
[W]
Separation distance according to frequency of
transmitter [m]
0,01 0,12
150 kHz – 80 MHz
d = 1,2 √P
80 MHz – 800 MHz
d = 1,2 √P
800 MHz – 2,5 GHz
d = 2,3 √P
0,12 0,23
0,73
2,3
7,3
23
0,38
1,2
3,8
12
0,38
1,2
3,8
12
0,1
1
10
100
10. THE MIGHTY MEDIC VAPORIZER

Related product manuals