What to do if my Vapormed Vaporizer shows ERR 004?
If your Vapormed Vaporizer displays ERR 004, this indicates a fault within the device. Immediately switch off the Vaporizer, disconnect it from the power supply, and then contact our Service Center.
How to fix Vapormed Vaporizers that won't turn on?
If your Vapormed Vaporizer won't turn on, the most likely cause is an empty battery. Check the battery display and charge the battery if needed. Alternatively, you can operate the Vaporizer using a Supercharger.
Why does my Vapormed Vaporizer show ERR 001?
If your Vapormed Vaporizer displays ERR 001, it means the battery temperature is too high. Allow the Vaporizer to cool down before using it again.
General| Device Type | Portable Vaporizer |
|---|---|
| Category | Medical Vaporizer |
| Model | Mighty Plus MEDIC |
| Manufacturer | Storz & Bickel |
| Heating Method | Convection and Conduction |
| Medical Device | Yes |
| Temperature Range | 40°C - 210°C |
| Battery Life | 90 minutes |
| Weight | 230 grams |
| Dimensions | 14.0 x 8.0 x 3.0 cm |
| Power Supply | Lithium-ion battery |
| Battery Capacity | 3000 mAh |
| Display | LED |
| Certification | CE |
| Heating Time | 60 seconds |
| Material | Medical Grade Materials |
To Next Page