Vapormed Mighty Plus MEDIC - Heating Up the Device; Device Display; Default Temperature Settings; Device Power On

20
5 COMMISSIONING AND OPERATION
5.8 Heating Up
5.8.1 Display
1 Actual Temperature Display
2 Plus Temperature Button
3 Battery Charge Display
4 Minus Temperature Button
5 Set Temperature Display
2
1
4
5
3
5.8.2 Default Settings
The Vaporizer offers three factory preset temperature levels:
Basic temperature: 180 °C (356 °F)
Booster temperature offset: +15 °C (+27 °F)
(relative to the basic temperature) corresponds to 195 °C (383 °F)
Superbooster temperature offset: +15 °C (+27 °F)
(relative to the booster temperature) corresponds to 210 °C (410 °F)
X Basic temperature and booster temperature can be changed individually,
whereas the superbooster temperature is xed.
X Start inhalation at 180 °C (356 °F).
X If one temperature level is no longer sucient, change to the next level
as described below.
5.8.3 Switching on
X Press the orange ON/OFF switch for at least half a second.
Ö Vibration and lighting up of the display.
Ö The display indicates the heating process by showing the set and actual
temperatures. This can take up to two minutes.
Ö A double vibration signal indicates that the basic temperature has been
reached.
5.8.4 Base Temperature
X Switch on the Vaporizer.
X Press the plus or minus button.
Ö Permanent change of temperature setting between 40 °C and 210 °C
(104 °F and 410 °F).