30
7 OPTIONAL ACCESSORIES
Wear & Tear Set - SKU 06 02 MM
The Wear Part Set contains all spare parts required to replace the Cooling
Unit.
Cooling Unit Set - SKU 11 17 / Cooling Unit - SKU 11 18
The Cooling Unit cools down the vapor and thus provides a pleasant tempera-
ture and an optimal aroma. To ensure cleanliness of the Cooling Unit, it should
be replaced regularly.
Mouthpiece Set - SKU 11 11
The Set includes four Mouthpieces for the Cooling Unit.
Cap Lock Set - SKU 11 53
The Cap Lock xes the Cap to the base of the Cooling Unit. The Set contains
three Cap Locks.
Screen Set, small - SKU 11 12
The Set contains four Screens with coarse mesh width and two Screens with
normal mesh width.
Coarse Screen Set, smal - SKU 11 40
The Set includes six coarse mesh Screens.
Normal Screen Set, small - SKU 11 03
The Set includes four normal mesh Screens.
Seal Ring Set - SKU 11 15
The Set contains all the sealing rings for the Cooling Unit and Filling Chamber.
Filling Chamber Tool Set - SKU 11 19
The various application options of the Filling Chamber Tool are described in
these Instructions for Use.
Herb Mill - SKU 09 30 / Herb Mill XL - SKU 09 43
The Herb Mill has extra sharp cutting teeth for nely crushed hemp owers.
Dosing Capsule Set, 40 pcs. -SKU 09 33 M
The crushed hemp owers are lled into the Dosing Capsules.
Filling Set for 40 Dosing Capsules - SKU 09 45
With the Filling Set, 40 Dosing Capsules can be lled simultaneously with
crushed hemp owers.
USB-C Supercharger - SKU 11 47
Thanks to the four interchangeable plugs the USB-C Supercharger can be
used almost anywhere in the world. The USB-C Supercharger enables fast
charging of the battery and mains operation of the Vaporizer when the bat-
tery is empty.
Youcanndtheseandotheraccessoriesaswellasdetailedinformation
about these products under https://www.vapormed.com or contact our
Service Center: 0049-(0)7461-969707-0.
To Next Page
Loading...