To Next PageTo Next Page
Need help?Do you have a question about the Varian CP-4900 Micro-GC and is the answer not in the manual?
General| Type | Micro Gas Chromatograph |
|---|---|
| Power Supply | 100-240 V AC, 50/60 Hz |
| Detector Type | Thermal Conductivity Detector (TCD) |
| Number of Channels | Up to 4 |
| Weight | Approx. 10 kg |
| Column Type | Capillary |
| Carrier Gas | Helium, Nitrogen |
| Application | Gas analysis |
Warranty terms for hardware.
Warranty terms for software.
Available warranty remedies.
Exclusions and limitations.
Limitation of warranty and liability.
Environmental conditions for operation.
Physical space needed for the instrument.
Guidelines for sample preparation and introduction.
Guide to installing gas regulators.
Information on carrier gases.
Steps to connect power.
Connecting peripherals.
Procedure to power on the instrument.
Procedures for handling samples.
Procedures for the first run.
How to set up the test method.
How to inject the sample.
Details on the EGC system.
Description of detectors.
Details on digital I/O.
Details on serial and Ethernet ports.
Details on analog I/O.
Description of the injector.
How the DMD works.
How to control the instrument via software.
Details on CP-Maitre Elite software.
Selecting the carrier gas.
Description of error classes and actions.
