①：Press Fn + Tab to enter the recording mode, when LED on number 1 to 5 turn on which means there are 5 group of
settings are available as well the saving path.
②：Press the numbers to select the group 1: 1st group 2: 2nd group��
③：Pressing the required key to swap the LED status. Swapping sequence is ON/OFF .
The status of Fn key will change after saving, please recover Fn status as required.
④：Fn+Tab, save.
⑤：Fn+→ to show the self-defined light effect. If no light effect recording,
the defaulted 1st group of setting will be 1、Q、A、Z；
2nd group of setting will be 2、W、S、X；
3rd group of setting will be 3、E、D、C;
4th group of setting will be 4、R、F、V；
5th group of setting will be 5、T、G、B；
Caps Lock、Page Up、Page Down does not support self-define.
Self-Defined Light Color
9
To Next Page
Loading...