VARON NT-02 - User Manual

Questions and Answers

T
Tracy RossAug 10, 2025
What to do if VARON Medical Equipment runs but the flow rate is small?
- G
  greenkariAug 10, 2025
  If your VARON Medical Equipment runs after starting but the flow rate is small, it might be due to a low flow rate setting. Try turning up the level of the flow rate. Alternatively, the tube might be twisted or blocked; in this case, straighten the tube. If the connecting tube inside the machine is disconnected or broken, disconnect the power supply and have it repaired by professional maintenance personnel.
D
Daniel LangAug 20, 2025
What to do if VARON Medical Equipment indicator light is normal but the machine fails to work properly?
- K
  Karen Wilson PhDAug 20, 2025
  If the indicator light on your VARON Medical Equipment is normal but the machine isn't working properly (making abnormal sounds), there are a few potential causes. It could be a compressor failure or that the connecting tube inside the machine is disconnected or broken; in either case, disconnect the power supply and have it repaired by professional maintenance personnel. Alternatively, the ambient temperature may be too high, activating the self-protection program of the oil-free compressor. This is normal, and the machine will restart automatically when the temperature lowers.
D
dianahillAug 30, 2025
Why does my VARON Medical Equipment have an odor?
- T
  Theresa DanielsAug 30, 2025
  The odor in the air stream of your VARON Medical Equipment is a normal smell emitted by silicone tubes and ABS plastic parts. It has been tested to be non-toxic and harmless and will gradually disappear with the use of the machine.