4. Suitable For M27-1/M24-1/S26-1 Model .
Turn the handlebar cross tube 180 degrees so it faces forward and tighten
the 2 bolts with a No.2 (M4 wrench) tool to secure the handlebar in place.
(2) Adjust The Handlebar Angle:
1. Suitable For C20-1/C20-1 Pro Model.
Adjust the handlebars to the proper position and then fasten the handlebar
riser clamp ring quick release.
2. Suitable For C26-2/M26-3/M26-2/M24-1 Model.
Adjust the angle of the handlebars and tighten the screws.
To Next Page
Loading...
