Symptom Remedy
The unit does not work, no light 1. Check the mains connection and the main fuse.
2. Check the settings in manual operation (‘Static Color’)
No response to the DMX con‐
troller
1. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interfer‐
ence to a DMX interface circuit.
2. Try using another DMX controller.
If the procedures recommended above do not succeed, please contact our Service Center. You
can nd the contact information at www.thomann.de.
Troubleshooting
Colors SonicStrobe
49
stroboscope
To Next Page
Loading...