Varytec Colors SonicStrobe - 7 Operating

7 Operating
To start operation, connect the device to the mains. The device is immediately operational.
The set values are retained during a power supply interruption.
This setting is only relevant if the device is working as Slave in a Master / Slave conguration
and is not controlled via DMX. In this operating mode, the device responds to the control sig‐
nals of the master device.
Press [MENU] repeatedly until the display shows ‘SLAv’ . Conrm with [ENTER].
Starting the device
Master/slave mode
Operating
30
Colors SonicStrobe
stroboscope