Varytec Hero Scan 150 - DMX Configuration, Modes, and Operation

Use the ‘DMX Address’ menu to set the DMX address.
Press [Enter] to activate the main menu and use [Up] or [Down] until the display shows ‘DMX
Address’ . Conrm the selection with [Enter] and use [Up] or [Down] to select a value between
‘001’ and ‘512’ to set the desired DMX address.
When the display shows the desired value conrm the setting with [Enter]. To exit the menu
item without making changes, press [Menu].
Make sure that this number matches the conguration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
8-channel 505
14-channel 499
DMX address
Operating
30
Hero Scan 150
LED scanner