Varytec Hero Scan 150 - Advanced Settings and Calibration

Use the ‘Settings’ menu to adjust the device parameters.
Press [Enter] to activate the main menu and use [Up] or [Down] until the display shows
‘Settings’ . Conrm the selection with [Enter] and use [Up] or [Down] to select the desired
parameter.
Parameter Function
‘Pan Rev’ Pan inversion
Use [Up] or [Down] to select ‘YES’ (reverse rotation) or ‘NO’ (normal
rotation).
‘Tilt Rev’ Tilt inversion
Use [Up] or [Down] to select ‘YES’ (reverse direction of inclination) or
‘NO’ (normal direction of inclination).
‘Display Rev’ Display reversal
Use [Up] or [Down] to select ‘YES’ (text in the display appears upside
down) or ‘NO’ (text in the display appears normal).
Settings
Operating
34
Hero Scan 150
LED scanner