Varytec Hero Scan 150 - Page 33

When the display shows the desired operating mode conrm the selection with [Enter]. To exit
the menu item without making changes, press [Menu].
Use the ‘Programs’ to select one of the preprogrammed shows.
Press [Enter] to activate the main menu and use [Up] or [Down] until the display shows
‘Programs’ . Conrm the selection with [Enter] and use [Up] or [Down] to select one of the eight
preprogrammed shows (display shows ‘Program1’ … ‘Program8’ ).
When the display shows the desired operating show conrm the selection with [Enter]. The
device plays the selected show as an endless loop. To exit the menu item without making
changes, press [Menu].
Auto programmes
Operating
Hero Scan 150
33
LED scanner