INIT PIN input and user PIN change (Initialization)
Identification Code
Signature
Modification of Your PIN
Unlocking e DigiPass
Storage and use of device
2
3
4
5
6
6
■ e Digipass can be turned on by pressing the button
and holding it press, the button.
■ If you press the same sequence once again the Digipass
will be turned off.
■ e device is going to shut down automatically if inactive
for about 30-40 seconds.
■ e access to all the Digipass functions is gained after
you input your five digit PIN code.
■ e initial PIN code of the Digipass is 00000. It must be
changed by you personally when turning on the Digipass
for the first time.
■ If Your Digipass has come to the wrong hands, it will be
blocked after three wrong PIN input attempts.
JSC “PNB Banka”
DP270 User’s Guide
1
DigiPass 270 User’s Guide
To Next Page
Need help?
General
