Vasner Standline Mini 12 - Maintenance, Cleaning, Service, and Disposal; Maintenance; Cleaning

VASNER
21
Maintenance, Cleaning, Service, Disposal
Maintenance
It is very important to perform careful and regular maintenance of the device in
accordance with the recommendations made in this manual so that it can run
eciently for a long time. In case there is a problem with your heater, please
contact your dealer.
• The cleanliness of the reector (reecting mirror) and tubes must be
checked at least once a month by the user. The cleaning and maintenance
instruction must be applied if dirty.
• According to the amount of dust in the place of use, the said checks should
be performed more often.
• Power cable and plug must be checked while cleaning the device. If there is
a deformation in the power cord or the plug, it must be taken to the autho-
rized service.
• Reector, wire and body deformation must be visually inspected while
cleaning the device. If there is a deformation, authorized service must be
called for things to do.
Cleaning
Attention! Regular and careful cleaning performed by the user will ensure that
your device will run more eciently and prolong its life.
• Your device must be turned o before starting to clean, its power cord must
be unplugged from the socket for safety and you must wait until it cools
down.
• If the reector (reecting mirror) and carbon lament tube is dirty, it must
be cleaned from the outside with dry air without opening the protective
cage wire of the device, if possible.
• The outer surface of the device must be cleaned with a soft cotton cloth or
a soft brush.
GB