Need help?Do you have a question about the Vaude MARK 3P and is the answer not in the manual?
Guidance on selecting an optimal and safe location for pitching the tent.
Unfold the tent on the ground, staking it in windy conditions.
Slide pole sections together carefully to avoid damage.
Erect the tent, ensuring the entrance zip is not under tension.
Drive stakes at a 45° angle, using appropriate stakes for ground type.
Clear the ground of sharp objects, using a groundsheet protector.
Spread the tent on the prepared ground, inner and outer attached.
Assemble poles correctly and insert into tent sleeves/eyelets.
Tense the poles, and clip inner tent onto poles if assembling separately.
Insert ridge pole, secure with hooks, and peg dome into connectors.
Attach cords over ridge pole and other poles, adjust tension.
Anchor the tent base securely with pegs, adjusting cord length.
Anchor the porch and use guy ropes for stability, wrapping around poles.
Ensure adequate ventilation through the porch and air vents.
Remove items, shake out debris, dry tent, and carefully remove poles.
Carefully pull out all tent pegs from the ground.
Unhook all guy ropes and anchor lines from the tent.
Remove the ridge pole first, followed by the remaining poles.
Fold poles and roll them with the tent, avoiding forcing into the bag.
Store the tent dry, clean, and in a ventilated place, away from chemicals.
Clean dirty zippers with a brush and lubricate with graphite or oil.
Unpack and dry tents promptly if unable to dry before packing.
Check poles for damage, wash, and use silicon spray for corrosion.
Use the Pole Doctor sleeve to repair broken aluminum tent poles.
Clean the tent by hand with a soft cloth and lukewarm water only.
Use Nikwax Tech Wash for stains and Solarproof for waterproofing.
Repair tears with tape and seal seams with PU or silicon sealer.
Retighten shock cords by retying the knot further up the cord.
Increases tent life, tear resistance, and water repellency.
40D polyamide ripstop PU/SI, waterproof to 5,000 mm.
30D Polyester Ripstop 285T for breathability and durability.
40D Polyamide Ripstop 240T, PU laminated, waterproof to 10,000 mm.
Heed safety guidelines for appliances and keep exits clear.
Follow campsite regulations and fire safety precautions.
Avoid storing hazardous materials like stoves or fumes inside the tent.
Wear shoes around the tent due to sharp stakes and anchors.
Do not stake guy lines over paths or trails to prevent tripping.
General| Type | Dome/Igloo tent |
|---|---|
| Coloration | Monochromatic |
| Zipper type | Two-way zipper |
| Product color | Green, Yellow |
| Number of doors | 2 door(s) |
| Number of rooms | 3 |
| Waterproof seams | Yes |
| Ground cloth type | Fixed ground cloth |
| Number of sleeping places | 3 person(s) |
| Interior material | Nylon |
| Ground cloth material | Polyamide |
Weight and Dimensions| Side door width | 80 mm |
|---|---|
| Sleeping area height | 118 mm |
| Sleeping area (W x L) | 165 x 230 mm |
To Next Page
