EasyManua.ls Logo

Vaude MARK 3P - Tent Fly Material; Inner Tent Material; Tent Floor Material; Safety Guidelines

Vaude MARK 3P
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MARK 3P
15
ENGLISH
FLY:
Tear-resistant 40D polyamide ripstop PU/SI; waterproof to 5,000 mm.
High resistance to tearing due to light but tensile polyamide fabric with
embedded strengthening bres
PU/SI - Polyurethane coating to the inner surfaces for maximum comfort
due to reduced condensation build-up. Triple silicon coating to the outer
surfaces for increased tear-resistance, UV-resistance and water run-o.
INNER TENT:
30D Polyester Ripstop 285T.
285T – tightly woven ripstop polyester. Wind, sand and snow proof with
high tear resistance and breathability.
15D Polyester 320T/20D Polyester Fine Mesh.
Ultralight material blend made from highly breathable mesh and wind
resistant, tightly woven polyester.
FLOOR:
40D Polyamide Ripstop 240T, PU laminated, water column 10,000 mm.
Tightly woven with reinforced cross threads, tear resistant polyamide oor
with a laminated PU membrane; waterproof up to 10,000 mm.
SAFETY GUIDELINES:
Please heed safety guidelines for all appliances used in the tent.
Always keep exits and throughways as well as vent openings accessible.
Find out what the rules and regulations are for the campsite you are on
and heed re safety precautions.
Avoid hazardous materials inside the tent, such as stove or automobile
fumes (for example in the Drive Base/Van).
Wear your shoes around the tent. Stakes and other anchors can be very
sharp.
Do not stake out the guy lines over paths or trails. These can be easily
tripped over in the dark.
GAL_TENT_Mark_3P.indd 15 08.08.2011 11:51:50

Related product manuals