90 Phone
Inserting the mobile phone
If the side brackets on the adapter are
in the closed position, press the
button near the front edge of the
adapter to open the brackets.
With side brackets of the adapter
opened, vertically lower the mobile
phone into the adapter as shown in
the above figure until the side
brackets snap in.
An engaging sound must be audible
when the mobile phone engages.
To remove the mobile phone, press
the unlocking button on the adapter
and lift the mobile phone.
Bluetooth connection
Bluetooth is a radio standard for the
wireless connection of, for example,
a telephone with other devices.
Information such as a telephone
book, call lists, the network operator’s
name and field strength can be
transferred. The functionality can be
restricted depending on the
telephone type.
To be able to set up a Bluetooth
connection with the Phone portal, the
Bluetooth function of the mobile
phone has to be activated and the
mobile phone has to be set to
"visible". For further information
please refer to the operating
instructions for the mobile phone.
To Next Page
Loading...
