90 Climate control
Electronic climate control
system
Controls for:
■ Temperature
■ Air distribution and menu selection
■ Fan speed
AUTO = Automatic mode
4
= air recirculation
Ê
= demisting and defrosting
OFF = switch on/off
Heated rear window Ü 3 30.
The preselected temperature is
automatically regulated. In the
automatic mode the fan speed and air
distribution automatically regulate the
air flow.
The system can be manually adapted
by use of air distribution and air flow
controls.
The electronic climate control system
is only fully operational when the
engine is running.
For correct operation do not cover the
sensor on the instrument panel.
Automatic mode
Basic setting for maximum comfort:
■ Press AUTO button.
■ Open all air vents.
■
n on.
■ Set desired temperature.
Temperature preselection
Temperatures can be set to the
desired value.
For reasons of comfort, change
temperature only in small increments.
Turn AUTO knob to adjust.
clockwise = warm
anticlockwise = cold
Heating will not be fully effective until
the engine has reached normal
operating temperature.
When the minimum temperature is
set below 16 ℃, the electronic climate
control system runs at maximum
cooling. LO appears in the display.
If the maximum temperature is set
above 32 ℃, the electronic climate
control system runs at maximum
heating. HI appears in the display.
Fan speed
The selected fan speed is indicated
with bars in the display.
Press ] or < to increase or decrease
the fan speed.
maximum fan
speed
= all bars displayed
minimum fan
speed
= one bar displayed
Press n button to deactivate fan.
To return to automatic fan speed:
Press AUTO button.
To Next Page
Loading...
Need help?
General
