Vehicle care 159
Centre high-mounted
brake light
If the centre high-mounted brake light
does not operate, have it checked by
a workshop.
Number plate light
1. Prise the light out with a
screwdriver.
2. Remove bulb housing downward,
taking care not to pull on the
cable.
Rotate bulb holder
counterclockwise to disengage.
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise.
5. Insert bulb housing and secure
using a screwdriver.
Interior lights
Courtesy lights
1. To remove it, prise the opposite
side of the light switch using a flat-
blade screwdriver.
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the light assembly.
Load compartment light
1. Prise the light out with a
screwdriver.
2. Remove bulb.
To Next Page
Loading...
