168 Vehicle care
3. Turn the bulb holder anti-
clockwise and remove it from the
reflector.
4. Disengage the bulb socket from
the plug connector by pressing
the retaining lug.
5. Remove and replace the bulb
socket with bulb and attach the
plug connector.
6. Insert the bulb socket into the
reflector by turning clockwise and
engage.
7. Mount the light assembly by
tightening both screws.
8. Assemble and engage the cover.
Tail lights
1. Release the cover and remove it.
2. Unscrew both plastic securing
nuts from the inside by hand.
3. Carefully withdraw the light
assembly from retaining pins and
remove.
4. Detach the plug connector from
the light assembly.
To Next Page
Loading...
