Vava VA-IH006 User Manual (English)

Other manuals for Vava VA-IH006

Questions and Answers:

A
Andrew StoneAug 16, 2025
What to do if Vava Baby Monitor can’t connect with the camera?
- M
  Matthew HowardAug 16, 2025
  If your Vava Baby Monitor is having trouble connecting to the camera, consider the following: * Ensure the camera is within 1.5-2m / 4.9-6.6ft of the monitor. * Make sure the monitor has sufficient battery. If it's low, charge it to restore a stable connection. * Verify the camera is properly connected to a power source. * Check for any large metallic objects (doors, refrigerators, mirrors) obstructing the signal between the camera and monitor. * See if other 2.4GHz devices (WiFi routers, microwave ovens) are causing interference. * If none of these are the issue, try re-pairing the devices by pressing the Pair Button on the camera's bottom, then press the Menu button, select through - > - >, and the monitor will auto-pair.
T
taylorstephanieAug 19, 2025
How to fix no sound on Vava VA-IH006?
- V
  Vicki RodriguezSep 12, 2025
  If there's no sound coming from your Vava Baby Monitor, check if the system sound volume is set to '0'. If it is, the monitor will be muted.
A
Amber HamiltonAug 22, 2025
What to do if Vava Baby Monitor is not powering on?
- A
  amandalopezAug 22, 2025
  If your Vava Baby Monitor isn't powering on, please check the following: * Ensure both the camera and monitor are turned on. * Verify the camera is correctly connected to a power source. Note that the camera does not charge and will power off when disconnected. * Confirm the monitor has sufficient battery. If the battery level icon flashes red slowly, it will automatically shut off. * Inspect the power cable for any damage.
M
Mark SteinAug 25, 2025
Why is there too much noise on my Vava VA-IH006?
- A
  Aaron HarperAug 26, 2025
  Excessive noise on your Vava Baby Monitor can be due to several reasons: * The volume might be set too high. To lower it, press the Menu Button, then the OK Button, and finally the Left Button to decrease the volume. * The camera and monitor may be too close to each other. Ensure they are at least 1.5m / 4.9ft apart. * The camera might be too far from the monitor. Keep it within 10 m / 32.8ft for optimal performance.
M
Matthew RiceAug 28, 2025
How to fix choppy videos on Vava Baby Monitor?
- A
  Alexandra FullerAug 28, 2025
  If you're experiencing choppy videos on your Vava Baby Monitor, try these solutions: * Ensure the camera is close to the monitor without any obstructions between them. * Adjust the monitor antenna to a vertical position to improve signal transfer.
A
Angelica FoleyAug 30, 2025
How to fix no sound from Vava Baby Monitor?
- D
  Donna AndersonAug 31, 2025
  If there is no sound coming from your Vava Baby Monitor, check that the system sound volume is not set to “0”. If it is, the monitor will be muted.
G
garciarebeccaSep 3, 2025
Why is my Vava VA-IH006 Baby Monitor making so much noise?
- M
  milesmartinSep 3, 2025
  If your Vava Baby Monitor is producing too much noise, it could be due to several reasons. First, the volume might be set too high; you can decrease it by pressing the Menu Button, then the OK Button, and finally the Left Button. Alternatively, the camera and monitor might be too close to each other; ensure they are at least 1.5m / 4.9ft apart. Also, the camera might be too far out of range; keep it within 10m / 32.8ft of the monitor.
D
Debra HawkinsSep 6, 2025
What to do if Vava VA-IH006 Baby Monitor videos are choppy?
- K
  Kimberly OwensSep 6, 2025
  If you're experiencing choppy videos on your Vava Baby Monitor, make sure the camera is close to the monitor without any obstructions between them. For better signal transfer, adjust the monitor antenna to a vertical position.
J
Joseph EdwardsSep 9, 2025
Why is my Vava Baby Monitor showing black and white pictures?
- S
  Sheila WilliamsSep 9, 2025
  If your Vava Baby Monitor is showing black and white pictures, try turning on the room lights. This should force the monitor out of night mode.
R
Raymond NelsonSep 12, 2025
Why are the pictures on my Vava VA-IH006 Baby Monitor black and white?
- B
  brettlopezSep 12, 2025
  If your Vava Baby Monitor is showing black and white pictures, try turning on the room lights. This should force the monitor out of night mode.

Vava VA-IH006 Specifications

General

Camera Resolution	720p
Night Vision	Yes
Battery Life	10 hours
Two-Way Talk	Yes
Temperature Sensor	Yes
Pan/Tilt/Zoom	Yes
Lullabies	Yes
VOX Mode	Yes
Range	900 feet
Connectivity	2.4GHz
Multiple Camera Support	Yes (up to 4 cameras)
Power Source	Rechargeable battery
Display	5-inch LCD

Related product manuals

Vava VA-IH006 User Guide

Table of Contents

Other manuals for Vava VA-IH006

Questions and Answers:

Vava VA-IH006 Specifications

Related product manuals