Vax 6121 Multivax - Operation; Vacuuming; Assembling Your Multifunction Cleaner

---
Operation
Assembling your multifunction cleaner (dry vacuuming)
4
WARNING: Unplug your multifunction cleaner before performing
maintenance/troubleshooting checks.
!
NOTE: The crevice tool, dusting
brush and upholstery tool, can all be
attached to the telescopic tube/handle.
!
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Vacuuming
Remove clean water
tank from unit.
Fit the pleated pre-
motor filter to the lid.
Slide dust bag into the
slots inside the base of
the unit.
NOTE: Fully unwind
power cord.
!
Lift up clips to remove
lid.
Fit the plug.
1
2
Remove the float
housing from the lid.
1
2
Press down on clips
to secure.
1
2
1
2
6121 Multivax Series User Guide v1.2.qxd:User guide 28/1/11 14:58 Page 4