Vax 6121 Multivax - Cleaning the Pre-Motor Filter; Emptying and Cleaning the Clean and Dirty Water Tanks; Clearing Blockages

vax.co.uk
9
Maintenance (Keep your Vax as good as new)
Cleaning the pre-motor filter
WARNING: Unplug your multifunction cleaner before performing
maintenance/troubleshooting checks.
!
Emptying and cleaning the clean and dirty water tanks
t
a
p
!
40° C
max
24hr
1
2
Remove the float housing
from the lid.
NOTE: Thoroughly
clean the dirty
water/clean water
tanks after use with
warm water
(max
40° C)
!
Clearing blockages
Hose Blockages
Disconnect the hose from your machine.
Carefully remove any blockages found and
reconnect the hose securely.
Accessory Blockages
Remove accessory from the hose or tube.
Carefully remove the blockage and return
to the cleaner.
6121 Multivax Series User Guide v1.2.qxd:User guide 28/1/11 14:58 Page 9