Using your machine
Using as a reach stick vacuum cleaner
Press the Powered Head/
accessory release clip
and pull to remove the
Powered Head from the
reach wand.
Choose an accessory
(pictures illustrated
dependent upon model).
Push the chosen
accessory into the
reach wand until it
clicks into place.
To turn the machine on,
press the on/o button
located on the handle.
The reach wand can be used for hard to reach places.
The reach wand can be used for hard to reach places
and at dierent heights for above oor cleaning.
The vacuum is not free
standing and in between
uses must always be
placed in the wall bracket,
or laid at on the oor in a
suitable location, so it does
not become a trip hazard
or can be stepped on.
To Next Page
Loading...
