EasyManuals Logo

Vax Blade TBT3V1B1 User Manual

Vax Blade TBT3V1B1
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
SolutionProblem
Check the contents panel on the box to make sure the part is included
with your vacuum cleaner.
There is an
accessory missing
The battery may not be charged. Go to ‘Getting Started.
The motor thermostat may have tripped. If this has happened, switch o the vacuum
cleaner. Remove and empty the dirt container and check for blockages. Clean the lters
and allow the vacuum cleaner to cool for approximately 1 hour (if you have washed the
lters you will need to wait 24 hours for the lters to fully dry before putting them back
into the vacuum cleaner).
Why does my vacuum
cleaner have no power?
Check the battery charger is plugged in. Go to ‘Getting started’.
Why isn’t the light on
the vacuum cleaner
lit when the battery
is charging?
The dirt container may not be correctly tted, remove the dirt container from the
vacuum cleaner and check it’s assembled correctly, ret ensuring it’s locked into place.
The separator is not correctly tted. Go to ‘Taking care of your machine’.
The lters may be clogged, clean the lters. Go to ‘Taking care of your machine’.
The dirt container may be blocked, empty the dirt container. Go to ‘Taking care of
your machine’.
The brush on the Powered Head has not been activated. Go to ‘Using your machine’.
There may be a blockage in the reach wand. Disconnect from the vacuum cleaner
and carefully remove any blockages. Go to ‘Let’s talk technical’.
Brushbar may be blocked, this will activate the brushbar motor thermostat.
Why won’t the vacuum
cleaner pick up?
What to do if it goes wrong
The brushbar has not been activated. Go to ‘using your machine’.
The Powered Head/brushbar may be obstructed. Go to ‘Let’s talk technical’.
Why won’t the
brushbar turn?
Why is dust escaping
from the vacuum?
The lters may be clogged, clean the lters. Go to ‘Taking care of your machine’.
The separator may be clogged, clean the separator. Go to ‘Taking care of your machine’.
The separator may be misassembled or not locked in correctly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax Blade TBT3V1B1 and is the answer not in the manual?

Vax Blade TBT3V1B1 Specifications

General IconGeneral
BrandVax
ModelBlade TBT3V1B1
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals