Vax Blade TBT3V1B1 - Page 15

Taking care of your machine
Reassemble lter and separator
Remove the lter
from the lid.
Tap the lter, foam and
separator over a bin
to remove any dirt and
debris. Do not wash
the separator.
Wash the foam and
lter under running
water (max 40°C).
Leave for 24hrs or until
fully dry before replacing.
24hr
24hr
TIP
For best cleaning results, lters require cleaning every 3 months or as needed.
1 - SEPARATOR 2 - FOAM
3 - FILTER 4 - LID
Step 1: place foam (2)
into separator (1).
Step 2: place lter (3)
into lid (4) with the pull
tab facing up.
Step 3: attach back
onto machine