Vax C85-TO-Be - Unwinding the power cord; Powering on the machine; Carpet vs Hard Floor Modes; Adjusting suction

TIP
Brushes on the oorhead
should be visible when using
on hard oors.
Unwind the power cord.
Do not pull further than the
yellow marker.
Plug into mains and push
the On/O button to turn
your machine on.
IMPORTANT: The base of the vacuum cleaner should always be positioned at on the oor when starting and in use.
CAUTION: When unwinding the power cord do not pull further than the yellow marker.
Using your machine
For use on carpets, click
rocker switch forward. For
use on hard oors click rocker
switch back.
Slide vent cover on hose grip open
to reduce suction if required.
Lower brushes for hard oors.Raise brushes for carpets.