vax.co.uk
5
NOTE: The 2-in-1 tool can only be attached to the extension tube.
NOTE: This unit has a constantly rotating brushbar. Vax recommends you raise the brushbar to the highest setting
before attaching accessories.
Using accessories
Attaching to extension tube
Remove hose from its holder and
unwind hose from unit.
Press the extension tube release
button and remove tube from holder.
Attach hose to extension tube.
For crevice tool, slide brush
downwards until it clicks into place.
For dusting brush, slide brushes
upwards until it snaps into place.
Operation
Vax U88-M8-B UG V1.0 [J149] [12.03.12]_User guide 12/03/2012 14:32 Page 5
To Next Page
Loading...
