11
support.vax.co.uk
CLEANING & MAINTENANCE
IMPORTANT: After every use wash the filter with warm water (40°C max) and leave for 24 hours or
until fully dry before refitting onto the machine. For best cleaning results filters should be replaced
every 6 months (depending on the level of use). Ensure all filters are in place before using the machine.
CLEANING THE FILTER
CLEANING THE SEPARATOR
Pull the tab on the bottom of the filter
to remove.
Wash the lter under running water (40°C max).
Leave for at least 24hrs or until fully dry before retting.
40°C
MAX
24hr
Wash the separator mesh under running
water (40˚ max) to remove any dirt
and debris.
40°C
MAX
Hold the top of the dirty water tank lid and pull upwards to remove.
To refit, line up the separator tab with the
lid tab and twist anticlockwise to lock.
Twist the separator clockwise to release
from the lid.
To Next Page
Loading...
Need help?
General
