12
support.vax.co.uk
CLEANING & MAINTENANCE
Fill the tank up with warm water
(40˚ max) and replace the cap.
Refit the tank into the machine.
Place the machine upright in the rinse/
storage tray.
IMPORTANT: We recommend rinsing the machine and quick cleaning the brushroll after every use.
MACHINE RINSE AND BRUSHROLL QUICK CLEAN
Switch the machine on. Press the trigger to release water onto
the brushroll. Release the trigger at
regular intervals to remove the brushroll
dirt and debris. Repeat the process until
the brushroll is clear and clean.
Recline the machine so that the
brushes rotate.
LARGE AREA
SMALL AREA
SOLUTION
SOLUTION
WATER
WATER
To Next Page
Loading...
Need help?
General
