The Vax Air Series VAU1200 / VARU1200 is a bagless upright vacuum cleaner designed for household use, emphasizing performance and ease of maintenance.
Function Description
The Vax Air is a powerful vacuum cleaner intended for indoor use on dry surfaces. It features a rotating brushbar for effective cleaning of carpets and hard floors, with a dedicated on/off switch for the brushbar to prevent damage to delicate surfaces. The vacuum is equipped with a telescopic extension tube and various accessories, including a 3-in-1 crevice, upholstery, and dusting brush tool, a turbo tool (VARU1200 model only), and an extension hose (VARU1200 model only), to facilitate cleaning in different areas and on various surfaces, including stairs. The machine incorporates a thermal cut-out to prevent overheating in case of blockages or full dirt containers, ensuring safety and prolonging the appliance's lifespan.
Important Technical Specifications
- Model Numbers: VAU1200 / VARU1200
- Voltage: 220-240V~50Hz
- Wattage: 1200W
- Capacity: 1.5L
- Filter Type: Washable pre-motor filter, HEPA 12 Antibacterial post-motor filter (not washable)
- Cord Length: 6m (VAU1200), 10m (VARU1200)
- Product Weight: 4.9kg (VAU1200), 5.3kg (VARU1200)
- Safety Features: Double insulated, meets applicable regulatory requirements, thermal cut-out for motor protection.
- Careline: AU: 1300 361 505, NZ: 0800 800 900 (Monday-Friday, 8:30 am to 5:00 pm)
Usage Features
The Vax Air is designed for user convenience with several features:
- Handle Height Adjuster: Allows users to adjust the handle to a comfortable height.
- Quick Release Cord Wrap: For easy storage and deployment of the power cord.
- Power On/Off Button: Located on the vacuum cleaner controls for easy access.
- Brushbar On/Off Button: Enables switching the brushbar on for carpets and off for hard floors to prevent damage.
- Recline Unit: The vacuum can be reclined for cleaning under furniture.
- Accessory Attachment: Accessories can be attached to the telescopic extension tube or directly to the hose for versatile cleaning.
- Stretch Hose (VARU1200 only): Provides extended reach for stair cleaning and other hard-to-reach areas.
- Brushbar Blockage Indicator: A red flashing light indicates a jammed brushbar, prompting the user to reset it.
- Portability: Features a carry handle for easy transport.
Maintenance Features
Regular maintenance is crucial for optimal performance and longevity of the Vax Air.
- Dirt Bin: Easy to remove and empty by pressing the dirt bin release button.
- Cyclone Separator: Can be slid out for advanced cleaning, tapping over a bin to remove excess dirt, or gently cleaning with a brush.
- Pre-Motor Filter: Washable filter that can be removed by twisting the canister lid, lifting it off, and pulling out the filter from the canister base. It should be washed with warm tap water (no hotter than 40°C) and allowed to dry for 24 hours before re-installation.
- Post-Motor Filter: This filter is not washable. It can be accessed by pressing the release clip on the filter cap, separating it from the holder, and tapping it over a bin to clean.
- Brushbar Maintenance: The brushbar can be accessed by removing the brushbar access clips to cut through any threads or hairs caught around it. A brushbar reset button is available to clear blockages, indicated by a red flashing light.
- Turbo Tool Maintenance (VARU1200 only): Blockages in the turbo tool can be removed by pressing two side buttons, pulling it apart, carefully cutting out the blockage with scissors, and then realigning and pressing the sides back together.
- Blockage Removal: Users are advised to switch off and unplug the vacuum cleaner before removing any blockages from the inlet, hose, or tube.
The manual emphasizes the importance of regularly checking, cleaning, and replacing filters to maintain the machine's performance and prevent overheating. It also warns against using the vacuum with clogged filters or without all filters in place. For safety, users are instructed to always switch off and unplug the vacuum cleaner before performing any maintenance or troubleshooting checks.