5
Getting started
Vax Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.
Attaching the wall mount
Without the handheld attached to the
reach wand and powered floorhead,
push the wall bracket onto the top and
back of the reach wand.
Choose a location for the machine to be
stored. Stand the powered floorhead
and wand against the wall, ensuring the
powered floorhead is flat on the floor.
Holding the wall bracket securely against
the wall, make a small mark for each
screw. Secure the wall bracket to the
wall using the wall plugs and screws.
The 2-in-1 tool can be fitted onto the
wall bracket.
Fully assemble the machine and firmly
press the machine into the wall bracket
to secure. Always ensure the machine is
securely locked into place.
Assembly
Attach the handheld to the reach wand
until it clicks into place. Attach the reach
wand to the powered floorhead until it
clicks into place.
To Next Page
Loading...
Need help?
General
