EasyManuals Logo

Vax Platinum PowerMax ECB1SPV1 User Manual

Vax Platinum PowerMax ECB1SPV1
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Assembling your carpet washer
Line up the SpinScrub tool
with the holder and slide the
tool downwards into place.
Slide the SpinScrub tool
holder over and down
the handle.
Turn handle lock dial
clockwise to lock
in position.
Assemble the tanks by tilting
and lining up the front of
the tank to the washer and
pushing the tank back until
it clicks into place.
Getting started
IMPORTANT: Carpets should be dry vacuumed thoroughly before washing.
Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/
upholstery, gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with white
paper towel or cloth. Check all carpets/rugs/upholstery material before rst use and if your carpet has more than
one colour, check all colours.
Test all carpets/rugs/upholstery before full usage. Run the carpet washer over a small hidden area. If no damage or
pile distortion occurs continue cleaning.
When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture cannot be moved,
place aluminium foil or wax paper under the legs. This will prevent wood nishes from staining your carpet. Pin up
furniture skirts and curtains.
When using the carpet washer, basic safety precautions should always be observed and don’t over saturate
your carpets.
Only use Vax carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee.
The clean water tank should only be lled with warm water (max 40�C). Filling the clean water tank with hot/
boiling water will damage your machine and invalidate the guarantee. This is a powerful carpet washer, before
plugging in make sure all controls are turned o also hold carpet washer rmly when staring and during use.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Stand the base of the carpet
washer on the oor in the
upright position. Line up the
handle with the main body
and push into place.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax Platinum PowerMax ECB1SPV1 and is the answer not in the manual?

Vax Platinum PowerMax ECB1SPV1 Specifications

General IconGeneral
StyleUpright
Color-
Total Power1200 W
Suction Power-
Dust Bin Capacity2.9 L
Power Controls-
Operating Radius-
Cord Length9 m
Hose Length4.6 m
Automatic Cord Rewind-
Exhaust Filter-
Motor Protection Filter-
Park system-
?leaning Area-
Noise Level-
Cleaning ModesSpot
FeaturesTelescopic suction wand
Brushes and AccessoriesDusting brush with synthetic bristles
Power Consumption-
Battery Life-
Battery Capacity-
Weight and Dimensions IconWeight and Dimensions
Depth410 mm
Height1100 mm
Width340 mm
Net Weight9.6 kg

Related product manuals